Sales Inquiry

Rock Blasting Presplitting

Design of controlled blasting (pre-splitting) in Golegohar .

Design of controlled blasting (pre-splitting) in Golegohar iron ore mine, Iran S. R. Dindarloo*1, N.-A. Askarnejad2 and M. Ataei2 Pre-splitting is a controlled blasting technique with applications in .

Case Study Cost Reduction in Wall Control Blasting

requires strict wall control blasting techniques to ensure the walls are both safe and cut to design angle. Presplitting is carried out in both transitional (Fig 2) and fresh rock (Fig 4), with trim blasting employed to further reduce the damage to the walls. resultsBrownzewing Gold .

Precision Presplitting – Design Aspects - Rock Products

Precision Presplitting is a form of presplitting where the blast design is based on the rock properties and rock mechanics. The differences between normal presplitting and precision presplitting were discussed in the previous article (Konya & Konya, Precision Presplitting - The Basics, 2016).

Study on Air, Water Deck in Pre-splitting And Rock .

The compressive and tensile strength of rock is less than 18.05 – 62.94 Mpa and 1.84 – 10.08 Mpa respectively. The average bench height was 8 to 14m, which was suitable for 160mm-diameter blast hole. The optimum burden and spacing was found to be 5 and 6m respectively for three rows blasting. The blast face should be kept vertical.

ITEM 208 ROCK BLASTING - dot.state.oh

Controlled blasting techniques include presplitting, cushion (trim) blasting, and sliver cut blasting. If the designed cut slope is steeper than 1:1 and deeper than 5 feet (1.5 m), use controlled blasting techniques, even if the main excavation is ripped or excavated.

Wall Control Blasting Techniques | Explosive Material .

WALL CONTROL BLASTING TECHNIQUES -----(ii) Presplitting - Presplitting is the most common controlled blasting technique and has proven successful in .

rock blasting presplitting - jyotichemicals

Blasting: Blasting, process of reducing a solid body, such as rock, to fragments by using an explosive. Conventional blasting operations include (1) drilling holes, (2) placing a charge and detonator in each hole, (3) detonating the charge, and (4) clearing away the broken material.

SPECIAL PROVISION 110---003 Excavation

design lines. Controlled blasting techniques are generally limited to the perimeter of the excavation. Cushion blasting, smoothwall blasting, presplitting, and light blasting combined with line drilling are examples of controlled blasting techniques. Controlled blasting is required in all structure excavations. f.

The Mechanics Of Pre-Splitting In Discontinuous Rock .

Pre-split blasting is a technique used to reduce damage to excavation profiles during blasting by pre-forming a continuous fracture between parallel boreholes lightly charged with decoupled explosives along the line of the required surface.

Rock blasting for mining - SlideShare

Rock blasting for mining 1. 1 ROCK BLASTING FOR MINING by Prof. A. Balasubramanian Centre for Advanced Studies in Earth Science University of Mysore Mysore-6 2. 2 Objectives: You are all aware that Mining is a major economic sector of any country. Mining is a geotechnical industry.

presplitting – Mining and Blasting

Posts about presplitting written by PARTHA DAS SHARMA. Weblog of Partha Das Sharma For Discussing Various Aspects of Mining, Explosives and Blasting .

Modelling explosive/rock interaction during presplitting .

a 2-D simulation of presplitting using decoupled explosives in rock blasting with very interesting results. The detonation of the explosive at the bottom of the hole sends a shock wave up the borehole driven by the explosive gas expanding into air. The explosive gas compresses the air against the stemming column

Numerical modeling of presplitting controlled method in .

Numerical modeling of presplitting controlled method in continuum rock masses Z. Aliabadian & M. Sharafisafa # Saudi Society for Geosciences 2013 Abstract Controlled blasting techniques are used to control overbreak and to aid in the stability of the remaining rock formation. The less competent the rock mass itself, the more

Consulting – Konya Industries

Rock Blasting Consulting. Konya Industries is a state-of-the-art, worldwide consulting firm in explosives and rock blasting. Our rock blasting consultants have worked on every continent in over 50 countries with both mining and construction activities.

SECTION 2xx BLASTING FOR ROCK CUT SLOPE EXCAVATION

2. When blasting is used to excavate rock, use controlled blasting techniques for all portions of any rock cut slope exceeding a vertical height of ten feet and a slope equal to or steeper than 0.5(H):1(V).

Numerical modeling of presplitting controlled method in .

The objective of the paper is numerical modeling of presplitting controlled blasting method by using distinct element method. In the last decades, many efforts were placed to study rock fragmentation subjected to blast loading in experimental environment.

Rock Excavation and Its Various Methods - Eagle Rock

In addition, drill hole traces are less apparent than presplitting and performs best in hard, competent rock. But, similar to presplit blasting, there is a small boring diameter limits blasting depth to .

PRESPLITTING ROCK SLOPES FOR HIGHWAYS - TRID

presplitting rock slopes for highways. the presplitting method of producing a plane of split rock along the face of the slope prior to any primary drilling or blasting is described.

PRESPLITTING TECHNIQUES IN ROCK EXCAVATION - TRID

a comparatively new development in alabama rock excavation methods, rock presplitting is discussed. this method of blasting to control cut slopes is described, including specifications and variations in drill hole size, depth and on-center spacing, explosives and stemming.

I, ^- ---, .. I .59~1099~/66 -- 4 I 1 Modeling .

the past few years. ALEGRA has been applied to a 2-D simulation of presplitting using decoupled explosives in rock blasting with very interesting results. The detonation of the explosive at the bottom of the hole sends a shock wave up the borehole driven by the explosive gas expanding into air. The explosive gas compresses the

Rock Blasting: Effects and Operations, 1st Edition .

This book is a unique supplement to contemporary scientific literature on rock blasting technology. It encapsulates theoretical and practical aspects of drilling and blasting techniques used in both surface and subterranean excavations connected with civil as well as mining activities.

McMahan Drilling and Blasting

McMahan Drilling & Blasting, Inc. is a full-service controlled drilling and rock blasting company that specializes in rock blasting and breaking for commercial and residential foundations and utilities. Since 1983, our family business has successfully completed thousands of rock blasting .

Numerical modeling of presplitting controlled method in .

The objective of the paper is numerical modeling of presplitting controlled blasting method by using distinct element method. In the last decades, many efforts were placed to study rock fragmentation subjected to blast loading in experimental environment.

Road Cut drilling, presplitting and Blasting - Dykon Blasting

Presplitting is often used to control the highwalls. Millions of pounds of explosives are used every year for this. Dykon Blasting Corp. is a rock blasting contractor and offers drilling and blasting programs for all these highway projects both large and small.

Presplitting | excavation technique | Britannica

Other articles where Presplitting is discussed: tunnels and underground excavations: Sound-wall blasting: .met by the technique of presplitting, developed in the United States in the late 1950s. Basically, this technique consists of creating a continuous crack (or presplit) at a desired finished excavation line by initially firing a line of closely spaced, lightly loaded holes drilled there.

(PDF) ROCK BLASTING FOR MINING - ResearchGate

Smooth blasting (contour or perimeter blasting) for underground mines and muffle blasting as a solution to prevent fly-rock from damag ing human habitants and structures. Presplitting

BTRM - Blasting, Projects and Civil Engineering

• Secondary (directional) drilling for boulder blasting • Presplitting for wall control • Services provision on rock drilling and blasting • Civil construction • Civil blasting-road • Supplies: supply of rock drilling equipment • Civil and mining equipment's

Rock Blasting for Mining | Explosive Material | Explosion

To simplify the work, rock blasting is the easiest way. In mining operations, blasting has become a routine work. With proper understanding of the rocks and blasting methods, the mining work can be done effectively. The basic objectives of this report is to highlight the principles and practices adopted in rock blasting operations for mining .

Analysis and Application on Controlling Thick Hard Roof .

Simulation results confirmed that the structural parameters of charge determined could ensure the favorable presplitting effect on the rock. (2) Attenuation Law of Blasting Vibration Velocity on the Rock between Blast Holes. After blasting, the different vibration speed corresponds to the different rock .

Presplitting | Download eBook PDF/EPUB

During the past two decades, there have been numerous technical contributions which have brought a better understanding of rock fragmentation with explosives, an improvement in drilling equipment and a noticeable evolution in the development of new explosives and blasting accessories.